Maintenance After the Use of Slitter Blades
The reason for the maintenance of the slitter blade after use, in this respect, for the slitter blade, there is its plastic crusher blade, immediately after, in fact, also refers to the cutting machine roller blade and other tools, in terms of its cutting time, in terms of its heat generated by the current and other factors, it is caused by the heat current is actually through the machine and its tools and workpiece to form a closed-loop system of the machine tool.
At the same time, it is important to note that when there is thermal current in the workpiece and the limited contact area of the tool, it can lead to wear and tear of the tool. Because of this, to improve its cutting performance and improve the durability of the tool, can also eliminate and strengthen the impact of slitting machine tool wear cutting heat current as well as its thermal cycle, however, we are actually to note that there will be another way, it is in the cutting time, on its cutting performance and durability is actually will get more and more attention.
Slitting machine equipment in metal cutting time, in a large extent is actually will be because of chip deformation and friction, in terms of this, it is in a large extent is actually will be directly on the cutting area to produce high temperature, and, is also because the cutting tool and the workpiece material is not the same, is also directly on the formation of a thermocouple formed by the thermoelectric potential and its DC current.
In this regard, as we have already mentioned, the thermoelectric current will, to a large extent, intensify the oxidation process on the working surface of the tool, which will accelerate the wear of the tool.
Slitting machine equipment in the work of the time, on its in certain conditions, will also be and machine tools, workpiece and tool contact belt and its slitting machine machine itself between the friction on the contact area in fact is a series of thermoelectric phenomenon, on its thermoelectric radiation phenomenon, certainly will have an impact on our equipment, we also need to carry out appropriate maintenance can.