• The main engine frame is use 100mm*80mm*3mm rectangular tube, thickness 25mm A3 carbon steel plate full welding, and then through the milling machine table of the gantry milling machine.
• The thickness of main engine wallboard is 40mm, the wallboard bearing hole location and slide block slot adopt linear cutting integrated processing surface water mill.
• Rolling wheel material: adopt Cr12MoV high quality mold steel
• Heat treatment: the rolling wheel went by two times vacuum heat treatment to reach HRC=60-62℃
• The rolling wheel processing: the roller after vacuum heat treatment, adopt Solidworks/ Mastercam integrated technology, CNC lathe precision machining, ensure that the machining accuracy of roll is within ±0.02mm.
• The main engine rolling wheel inner hole accurate grinding, the machining accuracy is within ±0.02mm
• The outer of main engine shaft ￠58 accurate grinding, the machining accuracy is within ±0.02mm
• Transmission section

The engine use 5.5KW motor (voltage standard: 380V/50HZ/3Ph) one set, equip 350 reduction gears one set, drive 1.5 “12 tooth main chain drive.
The main engine adopts 6 points and 12 sprocket drive.
The machine adopts Harbin 6309 bearing.

• Cutting off
  The cutting off section is made up of outside rail 3.0KW 30Ton four-column press machine, middle rail 2.2KW 18Ton four-column press machine, and inner rail 18 Ton four-column press machine.
  The material of cutting mold: using Cr12MoV mold steel, heat treatment, grinding machine, linear cutting finish machining
  The cutting mold treatment: after the heat treatment hardness of HRC60-62 ℃
• Electronic control
  The electric box is the PLC artificial intelligence control electric box, need to configure the servo motor. (ordinary motor does not need PLC)
  The electric box is equipped with color touch screen, encoder and servo motor. (ordinary motor does not need touch screen and encoder)
• The total electricity consumption is about 15KW.
• Product guarantee period,within one year after installation and debugging, the roll wheel normal wear is guaranteed for half a year, main engine and frequency changer are guaranteed for a year, punch motor and punch are guaranteed for half a year by manufacturer. There are relay, proximity switch, and mold no guarantee, but our factory can be equipped with some molds wear parts.
• The rolling machine length width height is: 4500 x 780 x1600. Material rack + rolling machine + aligning part + hydraulic machine punch cutting. The cover an area of is 7 m x 1 m x 1.5 m

Stainess steel drawer slide after formed profile looking